Software for Programmable
Refractometer,
300038
(Disk with up to 3 scales, see ordering
info) $30
Each Additional Scale,
300038AS
(Only available with purchase of Software 300038!) $10
Comes
preloaded with the commonly used Brix (0~95%)
and nD (refractive index) scales. In addition
you may purchase application-specific
scales or create your own custom scales. An
unlimited number of scales can be stored in the
software’s database. Transfer these from your
computer to the three numbered display positions
on Programmable Refractometer using
the built-in RS232 computer interface. Scales
can be loaded and unloaded from your database to
your refractometer at any time.
Test results can be saved to your computer,
graphed and analyzed. Reads samples as small as
0.4 ml with full scale accuracy of 0.1% using
CCD scanner (= linear scanned array imaging)
technology. Measurement results, unit of measure
and sample temperature are all displayed on the
large LCD and visual alarms are indicated by a
red LED. The sophisticated microprocessor
provides automatic calibration, automatic
temperature compensation and automatic shutoff
(after 3 minutes). A sturdy water resistant case
protects the electronics from wet environments
and makes for easy clean ups. Features one
button calibration to distilled water and
indicates when the battery should be replaced
(5000 readings). Comes ready to use with a 9V
battery, distilled water, transfer-pipette,
cable, AC adapter, software, instructions and a
protective case.
Weight: 18oz (500g). Dim: 7” x 4” x 2½” (180 x
100 x 65mm).
Specifications
Unit of Measure:
Range:
Res.:
Accuracy:
Temperature °C
0 ~ 40°
0.1
1°
Temperature °F
32 ~ 104°
0.1
2°
Brix
0 ~ 95%
0.1%
±0.1%
Refractive Index
+ up to 3 custom scales
1.3330 ~ 1.5318
0.0001
±0.0002
CUSTOM SCALES 300038 Ordering
Information
Custom scales are available by special
order. Please allow lead times of
approximately 60 days. Be sure to list
your desired scale number(s) in the
comments section during checkout.
