|
|
Force
Gauge with RS232 Output, 840060 (stand
sold below)
$361
|
|
Force
Gauge Stand, 840061
$745.20
|
|
|
Software,
850080
$48
|
|
Datalogger
Data Lab with Data Lab Graphical Software
v.1.04 or higher, 840051
$278 Close-out, save 50% while
supplies last.
$139
|
|
RS232 Computer
71" Cable, 840056
(required for
use w/software)
$30
|
|
RS232
to USB
Adaptor Cable, 840094
(for use with
RS232 cable: converts 9-pin plug to USB)
$20
|
|
Measure tension or compression anywhere or mount on the test stand and connect with
software 850080 via the RS232 port for automated testing and process control. Display results right side up or upside down for
compression or tension applications. The peak hold function also works in both modes. Also features a zero (tare) function, fast or slow response option, overload protection, and a low battery indicator. Comes in a protective carrying case containing an extension rod with a
full line of adapters and 6 AAA batteries. Dim: 9” x 3⅛” x 1½” (227 x 83 x 39 mm). Weight 20 oz (569 g).
|
Specifications
|
| Units: |
Range: |
Resolution: |
Accuracy: |
| Grams |
3
~ 5000 |
1 |
±(0.4%+ 1d) within 23±5°C |
| Oz. |
0.1
~ 176 |
0.05 |
. |
| Newtons |
0.03
~ 49 |
0.01 |
| . |
| Capacity: |
110 lbs (50 kg) |
| Travel: |
15 ¾” (40 cm) |
| Dimensions: |
25” x
10” x 9” (630 x 250 x 230 mm) |
| Weight: |
15.4
lbs (7 kg) |
Stand can
be used with 840060 or any other force gauge. Comes with a clamp for
securing wires or other materials to the base of the stand for tension
tests. The clamp may be removed to provide a flat base for compression
tests.
Warranty Information
|
